Warewashing green and clean multi-rinse Rack Type, Energy Saving Device

Standard Features

  • Adjustable feet for full access underneath the machine for cleaning.
  • Deep drawn pressed wash tank with fully rounded corners, sloped towards the drain to prevent dirt build up provides fast drainage in only a few minutes. Pressed wash tank with no welded points offer a guaranteed water tight solution.
  • Large counter balanced inspection doors allow unrestricted all-round access to the wash and rinse area. Door is insulated with injected foam. This adds strength as well as reduces noise and heat loss.
  • Self-draining wash pumps provide maximum hygiene and all wash and rinse zones drain automatically at the push of a button.
  • Drying zone removes most of water from the crockery through a high powered fan that extracts dry air from outside mixing it with the internal air, thus providing dry plates at a temperature cool enough to handle safely.
  • IP25 protection against water jets, solid objects and small animals (larger than 6 mm).
  • Built-in drain valve in the tanks allows automatic dump and fill to refresh the water in the tank without any interruption of the washing process.
  • Built-in Energy Saving Device (ESD) utilizes the hot steam generated by the machine in the rinse and wash tanks to heat up incoming cold water up to 55°C before entering the boiler, thus saving energy.
  • Multi-rinse technology guarantees rinse water consumption of 0.4 liters/rack regardless of the conveyor speed to ensure low energy, water, detergent and rinse aid consumption.
  • CLEAR BLUE filtering system removes soil from the wash water providing cleaner water and highly active detergent thus ensuring better washing performance and lower running costs.

    Request Quote Form








    SKU: SH-KPO92763 Categories: ,

    Description

    Electric

    • Supply voltage: 380-415 V/3N ph/50 Hz
    • Default Installed Power: 33.2 kW
    • Electrical power min: 26.2 kW
    • When the machine runs at DIN 10510 compliant speed.
    • Energy consumption: 27.9 kW/h
    • At average working conditions.
    • Pre-wash tank heating elements: 7 kW
    • 2nd pre-wash tank heating elements: 14 kW
    • 1st wash tank heating elements: 14 kW
    • Triple tank heating elements: 7 kW
    • Boiler heating elements: 7 kW
    • Pre-wash pump size: 0.37 kW
    • 2nd pre-wash pump size: 1.5 kW
    • 1st wash pump size: 1.5 kW
    • Rinse pump size (final, duo, triple): 0.55 / 0.32 / 0.32 kW

    Water

    • Inlet water line size: G 3/4″ / G 3/4″
    • Inlet cold water line size: G 3/4″
    • Drain line size: 50mm
    • Inlet water supply pressure: 1.5-7 bar
    • Inlet water supply temperature (wash): 5 – 65°C
    • The higher the temperature, the faster the warm-up.
    • Recommended temperature: 50°C.
    • Inlet water supply temperature (rinse and pre-wash): 5 – 30 °C
    • Inlet water supply hardness: 0-14 °fH / 0-8°dH
    • When below 7°fH/4°dH special detergent and rinse aid are needed.
    • Peak rate of drain flow: 1.8 l/s
    • Pre-wash tank size: 35 l
    • 2nd pre-wash tank size: 70 l
    • 1st wash tank size: 70 l
    • Duo rinse tank size: 20 l
    • Flow rate of wash pump: 500 l/h
    • Triple rinse tank size: 20 l

    Key Information

    • Rinse water consumption at max. speed (l/rack)*: 0.4
    • Rinse water consumption at max. speed (l/h) **: 120
    • Productivity per hour (slow speed): 183 Basket / 3294 dishes
    • Productivity per hour (2° speed): 201 racks / 3618 dishes
    • Productivity per hour (1° speed): 300 racks / 5400 dishes
    • Pre-wash temperature: 0 °C
    • Duo rinse temperature: 75 / 80 °C
    • Final rinse temperature: 85 °C
    • 2nd pre-wash temperature: 10 – 10 °C
    • Wash temperature: 55 – 65 °C
    • Triple rinse temperature: 70 – 75 °C
    • External dimensions, Width: 3530 mm
    • External dimensions, Height: 1785 mm
    • External dimensions, Depth: 895 mm
    • Height with door open: 2095 mm
    • Charging hole size (width): 530 mm
    • Charging hole size (height): 490 mm
    • For transportation purpose only, the depth can be reduced to 795mm by removing the control box and the door handles.
    • Net weight: 470 kg
    • Shipping weight: 529 kg
    • Shipping height: 2260 mm
    • Shipping width: 1040 mm
    • Shipping depth: 3100 mm
    • Shipping volume: 7.29 m³
    • Noise level: <62 dBA
    • Reference norm used to measure the noise: IEC60335-2-58 annex AA.
    • Table to table distance: 3530 mm

    Air Emission

    • Air flow (entrance, exit): 0 / 145 m³/h
    • Air temperature (entrance, exit): 45 / 45 °C
    • Air humidity (entrance, exit): 100 / 100 % r.h.
    • The data is measured at exhaust points at 25°C and 60% r.h. ambient conditions, 18°C inlet water temperature and refer only to the machine.
    • Latent heat: 12300 W
    • Sensible heat: 5000 W

    This model requires a ventilation hood. Please refer to the attached “Recommended Exhaust Hood Design”.