Description
Electric
- Supply voltage: 380-415 V/3N ph/50 Hz
- Default Installed Power: 33.2 kW
- Electrical power min: 26.2 kW
- When the machine runs at DIN 10510 compliant speed.
- Energy consumption: 27.9 kW/h
- At average working conditions.
- Pre-wash tank heating elements: 7 kW
- 2nd pre-wash tank heating elements: 14 kW
- 1st wash tank heating elements: 14 kW
- Triple tank heating elements: 7 kW
- Boiler heating elements: 7 kW
- Pre-wash pump size: 0.37 kW
- 2nd pre-wash pump size: 1.5 kW
- 1st wash pump size: 1.5 kW
- Rinse pump size (final, duo, triple): 0.55 / 0.32 / 0.32 kW
Water
- Inlet water line size: G 3/4″ / G 3/4″
- Inlet cold water line size: G 3/4″
- Drain line size: 50mm
- Inlet water supply pressure: 1.5-7 bar
- Inlet water supply temperature (wash): 5 – 65°C
- The higher the temperature, the faster the warm-up.
- Recommended temperature: 50°C.
- Inlet water supply temperature (rinse and pre-wash): 5 – 30 °C
- Inlet water supply hardness: 0-14 °fH / 0-8°dH
- When below 7°fH/4°dH special detergent and rinse aid are needed.
- Peak rate of drain flow: 1.8 l/s
- Pre-wash tank size: 35 l
- 2nd pre-wash tank size: 70 l
- 1st wash tank size: 70 l
- Duo rinse tank size: 20 l
- Flow rate of wash pump: 500 l/h
- Triple rinse tank size: 20 l
Key Information
- Rinse water consumption at max. speed (l/rack)*: 0.4
- Rinse water consumption at max. speed (l/h) **: 120
- Productivity per hour (slow speed): 183 Basket / 3294 dishes
- Productivity per hour (2° speed): 201 racks / 3618 dishes
- Productivity per hour (1° speed): 300 racks / 5400 dishes
- Pre-wash temperature: 0 °C
- Duo rinse temperature: 75 / 80 °C
- Final rinse temperature: 85 °C
- 2nd pre-wash temperature: 10 – 10 °C
- Wash temperature: 55 – 65 °C
- Triple rinse temperature: 70 – 75 °C
- External dimensions, Width: 3530 mm
- External dimensions, Height: 1785 mm
- External dimensions, Depth: 895 mm
- Height with door open: 2095 mm
- Charging hole size (width): 530 mm
- Charging hole size (height): 490 mm
- For transportation purpose only, the depth can be reduced to 795mm by removing the control box and the door handles.
- Net weight: 470 kg
- Shipping weight: 529 kg
- Shipping height: 2260 mm
- Shipping width: 1040 mm
- Shipping depth: 3100 mm
- Shipping volume: 7.29 m³
- Noise level: <62 dBA
- Reference norm used to measure the noise: IEC60335-2-58 annex AA.
- Table to table distance: 3530 mm
Air Emission
- Air flow (entrance, exit): 0 / 145 m³/h
- Air temperature (entrance, exit): 45 / 45 °C
- Air humidity (entrance, exit): 100 / 100 % r.h.
- The data is measured at exhaust points at 25°C and 60% r.h. ambient conditions, 18°C inlet water temperature and refer only to the machine.
- Latent heat: 12300 W
- Sensible heat: 5000 W
This model requires a ventilation hood. Please refer to the attached “Recommended Exhaust Hood Design”.